Luoyang Boju Metallurgical Auxiliary Materials Co., Ltd.

CN  EN

NEWS CENTER

Company News

Trade News

Media

图片名称

What are the standards for distinguishing the aluminum content of high alumina bricks?

What are the standards for distinguishing the aluminum content of high alumina bricks?

High alumina bricks are a type of refractory material, and the main component of this refractory brick is Al2O3.

Details

What are the standards for distinguishing the aluminum content of high alumina bricks?
图片名称

What are the manifestations of the use of castables?

What are the manifestations of the use of castables?

Castable, also known as refractory castable, is a granular and powdery material made by adding a certain amount of binder to refractory materials. It has high fluidity and is formed by casting as an amorphous refractory material.

Details

What are the manifestations of the use of castables?
图片名称

Features of Heat-accumulating Combustion Technology

Features of Heat-accumulating Combustion Technology

Main features of heat-accumulating combustion technology: 1. The regenerative chamber consisting of ceramic spheres or honeycomb body has simple and compact structure and improves the heat transfer coefficient, and its specific surface area is tens of times larger than that of outdated checker brick; 2. Because of 85% heat efficiency, it can preheat the air to about 1000ºC, and reduce the exhaust gas temperature to below 150ºC and has waste heat recovery of 70%; 3. Greatly expand the application range of low-heat value gas; 4. Reduce air consumption, low C02 and NOX emission, reduce 10%-70% of CO2 emission and over 40% of NOX emission, facilitate the pollution reduction and environmental improvement; 5. Improve the furnace temperature: with the same furnace size, its output can improve over 20%; 6. Air or gas directly enters the hearth for burnup

Details

Features of Heat-accumulating Combustion Technology
图片名称

Technology development report of fire-resistant structures, fixtures

Technology development report of fire-resistant structures, fixtures

Regenerative combustion technology is characterized by: 1. Using ceramic balls, honeycomb regenerator composed of simple and compact structure than the surface area of the old-fashioned lattice bricks of large numbers of times to improve the heat transfer coefficient; due to thermal efficiencycan reach 85 percent, capable of air preheater to about 1000 degrees, the exhaust gas temperature can be reduced to less than 150 degrees, the heat recovery of 70%; greatly expanded the scope of application of the low calorific value gas; reduce air consumptionlow C02 emissions of NOX, CO2 emissions reduced by 10% -70%; NOX emission is reduced by 40%, reducing pollution to improve the environment; improve the furnace temperature, in the same furnace size conditions, the output can

Details

Technology development report of fire-resistant structures, fixtures
图片名称

The philosophy and practice of green refractory

The philosophy and practice of green refractory

Under the circumstance of vigorously advocating environmental protection and developing low carbon economy, developing the “green refractory material” is imperative and key development strategy related to the sustainable development of current and later refractory material industry

Details

The philosophy and practice of green refractory
图片名称

Congratulations on the Launching of Our Website!

Congratulations on the Launching of Our Website!

Congratulations on the Launching of Our Website!

Details

Congratulations on the Launching of Our Website!
< 12 >